Track Feature:
Refer to page 9 (Programmable Operation)
o
Before going into P1 (preset) program is the 1/4 mile
Track
display. Select this
feature as you would any other program. Once displayed press
START BELT
key
to begin exercise. A dot will travel around the track indicating your position. The
Segment Time
window will indicate the number of laps.
Panel Dim Feature:
o
After belt movement you may press and release the
DIM
key. This will blank out
the display. Any key (Speed/Incline for example) will light the display back up for a
few seconds. Press and release the
DIM
key to exit this mode. The computer
display is still running, but simply not displaying the information.
To Turn Treadmill Off:
o
Two methods accomplish this:
(1) Press and release red
STOP/PAUSE
switch while in pause mode. Display will
blank out. Use this method when possible.
(2) Pull tether cord.
Should be used only in panic situation.
Hour Meter Feature:
When the tether cord is initially placed in operational position the
Distance
window will
display total
hours
.
The
Speed
window indicates upper computer software version. This is a service issue
to refer to computer software design.
Dot Matrix Display
o
This display illustrates in programmable modes the workout effort. Twenty rows of
“dots” (7 high) indicate each segment of a workout. When all the “dots” of a row
are lit, this indicates 100% of the program level. For example: if a program
maximum speed is 3.5 mph, all dots lit mean 3.5 mph. The dots are only to show
an approximate level (speed/incline) of effort. They do not necessarily indicate a
specific value - only an approximate percent to compare levels of intensity.
7
Smooth 9.6
2/06/01
s
s
