Smooth Fitness Sit N Cycle, Руководство пользователя

Страница: 5 / 12

5
“
H
ARDWARE
I
DENTIFICATION
C
HART
”
Unpack the box in a clear area. Review the Hardware Kit List below. This chart is provided to help identify the hardware
used in the assembly process. Place the washers, the end of bolts, or screws on the circles to check for the correct
diameter. Use the small ruler to check the length of the bolts and screws. Do not dispose of the packing material until the
trial period has expired
NOTICE: The length of all bolts and screws except those with flat heads is
measured from below the head to the end of the bolt or screw. Flat head
bolts and screws are measured from the top of the head to the end of the
bolt or screw
Note:
Please review the contents of the hardware kit pictured below.
Some small parts may have been pre-attached for shipping. If a part is not in the hardware bag, check to see if it has been
pre-assembled
HARDWARE KIT Part No. and Description
Q’TY
29 Lock Washer (M8) 4 pcs
30 Washer (8×38×2.0t) 2 pcs
33 Screw (M4x12mm) 4 pcs
39 Bolt (M8xp1.25x16mm) 2 pcs
40 Bolt (M8xp1.25x30mm) 2 pcs
41 Bolt, Socket Head (M8xp1.25x50mm) 1 pcs
49 Bolt, Hex Head (M8xp1.25x50mm) 2 pcs
THE FOLLOWING TOOLS ARE INCLUDED FOR ASSEMBLY:
MULTI WRENCH TOOL W/
PHILLIPS SCREWDRIVER ALLEN WRENCH
(6 mm)