®
BTD
7
ASSEMBLING DEVICE
• The device is usually delivered fully assembled, the following instructions are for the assembly after cleaning.
• Moistening the sealing rings with liquid makes the assembly easier.
.
The Insulator (2) is placed on the positive pole (1).
The positive pole (1) is inserted into the base (3)
together with the insulator (2)
The positive pole screw (7) is pushed through the
insulator (8) into the base (3) and screwed to the positive pole (1).
The four screws (9) for wire fastening
are screwed into poles (1, 3).
The top cap (4) is put on the base (3).
The drip tip (5) is inserted into the top cap (4).
1
2
3
4
5
6
