®
BTD
5
ADJUST AIRFLOW CONTROL
By twisting the top cap opposite the base, one or two air holes (per side) are opened, depending on the position. This
allows the airflow to be set individually. If the top cap is turned all the way to the left, the air supply is completely
closed (eg for transport)
Turning to the left, until it stops,
closes the airflow completely.
Turning to the middle position
opens both air holes.
Turning to the right, until it stops,
opens one of the air holes.
WARNING
• Never vape with completely closed airflow control.
• Make sure there is sufficient air supply at higher wattage levels.
USE OF AN ALTERNATIVE DRIP TIP
The drip tip of the Taifun® BTD can be exchanged for another standard drip tip. However, it is important that the
connection of the Drip Tip is max. 5 mm long. Otherwise, it may happen that the drip tip jut out into the chamber and
touches the coil. Especially with the use of metal drip tips, there is a risk of short circuit.
Therefore, make sure to install the coil pointing downwards.
The Drip Tip may not extend more
than 5 mm into the top cap.
Please note this length when
using other drip tips.
The coil has to be installed
pointing downwards.
!
