background image

15 

 

! WARNING ! 

 

● 

 Do not do any cleaning or maintenance on any grill parts until all parts are cool! Be sure 
that the valve on the LP Gas Cylinder is closed and in the OFF position 

 

● 

After every cooking session, you may run the gas grill on HIGH to burn off any food resi-
due, keeping the residue from building up. 

 

CLEANING 

 

● 

Use only mild dishwashing detergents, hot water, a nylon scrub pad and a BBQ wire 
brush cleaning tool. 

● 

Always rinse all surfaces thoroughly after cleaning. 

● 

Handle Porcelain coated surfaces gently and carefully- they are made from high tempera-
ture glass and can chip easily. 

● 

Note: Grease Cup should be emptied and cleaned after each use to prevent flare – 
ups  and /or grease fires. 

 
BURNERS  

1.  Turn the gas OFF at the LP Gas Cylinder and the burner control knobs.

 

2.  Lift off the cooking grids and the heat tents covering the burners.

 

3.  Remove the screw attaching the burners at the back of the grill.

 

4.  Gently and carefully, tilt the back of the Burner up and slide it backwards off the valve ori-

fice, then lift out of the grill.

 

5.  Wipe clean the orifice face.

 

 
 

CARE AND CLEANING 

TROUBLE SHOOTING THE GAS GRILL 

Burner does not light : 

1.  Check if LP Gas Cylinder is empty? 
2.  Check  Igniter wire – is there a spark? 
3.  Check for spider webs or insect nests inside, clogging the Burner 

  

Flame color is Yellow, should be Blue: 

 

1.  Check for spider webs or insect nests inside, clogging the Burner 
2.  Close Lid and run on HIGH to burn off residue on Burner 

 

Flame flares up:   

1. Cooking 

temperature is set too high 

2.  Food being cooked is too fatty 
3.  Grease has accumulated in the grill. Clean and burn off 

OPERATING INSTRUCTIONS 

IMPORTANT 

!

    CURING PROCESS

 

 

Step 1: Lightly coat ALL INTERIOR surfaces (including interior of lids, cooking grids and area be-
low the cooking surface) with vegetable oil or vegetable oil spray. 
Step 2: Ignite the LP gas grill side and burn at medium temperature for one hour. 
Step 3: Let the grill cool completely and it is ready for use. 

FOR YOUR SAFETY, FOLLOW ALL SAFEGUARDS AND INSTRUCTIONS. 

Содержание VT280SS1

















Отзывы: