11
Assembly
Step 6
Fig. 7
Step 7: Assemble LP Gas Cylinder Bot-
tom Support Brace
Locate
: LP Gas Cylinder Bottom Support
Brace, (4) M6x12 bolts
Procedure:
Attach the LP Gas Cylinder Bottom
Support Brace to the Left Rear Leg #3 and Left
Front Leg #4 using (4) M6x12 bolts as shown
as Fig. 7.
Fig. 6
Step 7
Step 6: Assemble Wheels
Locate
: (2) Wheels, (2) Wheel Caps, (2) Axle
Pins, (2) R clips
Procedure:
Slide (2) Axle Pins through the
Wheels and then through the Left Front Leg #4
and Left Rear Leg #3. Then insert (1) R clip
through the hole in each Axle Pin as shown as
Fig. 6. Place the wheel caps onto the outsides
of the Wheels.
Enlarge View
