Grill Assembly
Locate:
• Control Knob
• Side Burner
• Side Burner Grid
• (2) M4 x .31 Bolts
• (1)
5
/
32
”
–30 x.23
”
bolts
Step 2:
Take the Side Burner and pull it through
the opening in the table as shown and
slide it onto the Side Burner Valve.
Note: Make sure that the burner tube is positioned
over the tip of the valve.
Step 1:
Take the Side Burner Valve connected to the Manifold
Assembly and attach it through the front face of the
Side Burner Table with (2) M4 x .31 Bolts. Then attach
the Control Knob.
Step 3:
Attach Side Burner to Base with
(1)
5
/
32
”
–30 x.23
”
bolt as shown.
Place the Side Burner Grid over
the Side Burner.
Locate:
• (4) “R” Clips
• (2) Burners with Ignitor Electrodes
• (2) Burners
• (2) Burner Crossover Tubes
• (4)
5
/
32
”
–30 x.31
”
bolts
Instructions:
Place Burners in Barrel Base as shown here.
See images for location of Burners with Ignitor Electrodes.
Make sure to place Electrode wires through the openings in
the Barrel Base for later attachment.
Note: Make sure that the burner tubes are positioned over the
tips of the valves.
Attach “R” Clips as shown here to hold backside of
Burners. Attach the Burner Crossover Tubes with
5
/
32
”
–30 x.31
”
bolts to secure front side of Burners.
3-Burner Version
4-Burner Version
2-Burner Version
Burners with
Ignitor Electrodes
Burner with
Ignitor Electrode
Burner with
Ignitor Electrode
NOTE: Part counts will vary
depending on number of burners.
10. Burner Assembly
9. Side Burner Assembly
NOTE: For 3 & 4-Burner Grills Only
15
