Smoke hollow 1900677, Руководство пользователя

Страница: 12 / 60

12
Assembly
13
Step 12:
Screw the smoke stack caps into the smoke
stacks in a clockwise motion. The smoke
stack cap is adjustable to allow more or less
smoke to exit the grill.
(Fig.12)
11
Assembly
Step 13: Assemble Smoke Stack
Caps
Locate : (2) Smoke Stack Caps
Procedure
: Refer to Fig. 13, screw
clockwise the Smoke Stack Caps into
the Smoke Stacks.
The smoke stack
cap is adjustable to allow more (anti-
clockwise) or less (clockwise) smoke
to exit the grill.
Note: Always
wear protective gloves
or mitts when turn the smoke stack
caps while in use.
Fig. 13
Step 14
Step 13
Step 14: Assemble Side Shelves
Locate : (2) Side Shelves and (8) M6x52
bolts
Procedure
: Refer to Fig. 14, attach (2)
Side Shelves to the each Legs using (8)
M6x52 bolts.
Fig. 14
Step 12
Fig. 12
Step 12: Assemble Smoke Stacks
Locate : (2) Smoke Stacks, (6) M6x15
bolts and (6) M6 KEPS nuts
Procedure : Refer to Fig. 12, insert (2)
Smoke Stacks through the Lid from the
inside. Align (3) holes in the Smoke
Stacks with the holes in the Lid first. Then
attach the Smoke Stacks to the Lid with
(6) M6x15 bolts inserted through the Lid
from the outside. Fasten the Smoke
Stacks to the Lid with (6) KEPS nuts se-
curely inside the Lid as shown in Fig.12.
Fig. 12
Smoke Stack Caps
Step 13:
Attach both folding side
shelves to the legs using (8)
M6 shoulder bolts.
(Fig.13)
12
Assembly
Step 15
Step 16: Assemble Gear Panel
Locate : Gear Panel and (2) M6x15 bolts
Procedure : Refer to Fig. 16, attach the Gear
Panel to the Left Front Leg #4 using (2)
M6x15 bolts.
Fig. 16
Step 15: Assemble Charcoal Tray Ad-
justable System
Locate : Charcoal Tray Adjustable System
and (4) M6x15 bolts
Procedure : Refer to Fig. 15A, insert the bar
of Charcoal Tray Adjustable System
through the hole in the left side of the Fire-
box Assembly.
Attach the Charcoal Tray Adjustable Tray to
the strengthening panel in the rear of the
Firebox Assembly using (4) M6x15 bolts as
shown in Fig. 15B.
Fig. 15A
Step 16
Fig. 15B
Step 14:
Insert the rod of the charcoal tray lift assembly through the hole in the left
side of the firebox assembly.
(Fig.14A)
Attach the charcoal tray lift assembly to the panel in the rear of the firebox
assembly using (4) M6x15 screws as shown in
(Fig. 14B)
Fig. 14A
Fig. 13
Charcoal Tray Lift
Assembly
Right side shelf assembly shown here.
Repeat procedure to assemble Left side shelf.
14
12
Side shelf also folds
to down position.
Fig. 14B