12
¾
Avoid overheating of the smoke machine by high operating temperatures. Don’t let spotlights
directly shine on the device.
¾
Do not let the smoke machine run without any fluid as the pump will run dry.
¾
Some droplets of condensation will form at the nozzle. That is normal and not a malfunction.
Remove the fluid droplets as they can destroy the electronics.
¾
Check the state of the sinter-filter from time to time and clean or replace it when necessary.
CAUTION
: The evaporator of our devices must not be cleaned, as the cleaning substances can
fundamentally damage the evaporator. This leads to a loss of the warranty.
¾
Clean the fluid bottle before refilling it to avoid dirt that can cause malfunctions.
¾
If you install the device permanently you need to maintain a smoke- and fog-free air supply.
Cooling air with concentrated fog can condensate in the device and lead to humidity damages.
BEWARE
: Remove the droplets only if the devices is cooled of! Don’t expose you to the Danger of
burning.
6. Maintenance
