3. Remove the spout cover from the 5 gallon bucket of
material that you intend to spray (do not pull out the
spout tube).
4. Set the sprayer unit on top of the bucket by guiding
the inlet tube into the pouring spout of the bucket lid
5. Set the power switch on the motor to the off
position
6. Insert the battery into the receptacle, when fully
inserted it will contact the sprayer housing.
7. Check the sprayer trigger handle to make sure the
lever is not locked in the open/ on position.
8. You are now ready to begin spraying your material.
Page 10
SMK shall in no event be liable for death, injuries to
persons or property or for incidental, contingent, special or
consequential damages of any kind by the reason of use or
sale of any defective product or part. This limited warranty
covers units distributed in the United States of America
only.
This limited warranty is in lieu of all other warranties,
expressed or implied, and no other person is authorized to
give any other warranty or assume obligation or liability on
behalf of SMK Industries, Inc.
Products and parts must be flushed free of all fluids prior to
returning to SMK for warranty inspection.
PROOF OF PURCHASE
Please retain your dated sales receipt as proof of purchase
to validate the warranty period.
PRODUCT WARRANTY CARD
You must fill out and return the enclosed product
registration card to receive full warranty protection
SPECIFICATIONS
Integral pump
SHURflo® Model: SLV10-AA48
Pump motor voltage
12 Volt
Chassis
Powder coated steel
Trigger
Chapin
Wand
Chapin
Wand tips
Chapin
Approved batteries
Dewalt
®
12V – 18V
or
Interstate
®
brand 12V- 18V
Page 7
