Safety Precautions
W A R N I N G
Before attempting to operate the unit, read and
understand all safety precautions and warnings.
Do Not spray gasoline or other flammable or
combustive materials in this unit
Do Not use this unit in a combustive environment.
Do not use the unit when tired, ill, or under the
influence of alcohol, drugs or medication.
Inspect unit before each use for loose, broken,
cracked, split, or damaged parts. Do Not operate the
unit with loose or damaged component parts.
Always wear safety glasses or goggles that are
marked with ANSI Z87
Use only in daylight or good artificial light.
Never use unit without the proper factory authorized
accessories attached. When using the unit, ensure
that the sprayer discharge hose is securely
attached.
Do not use Acetone, Lacquers, Lacquer thinners, or
Acetate in this unit. These are flammable liquids and
will also permanently damage the internal
components of the sprayers pump.
Do not modify the unit
Use approved batteries only
Page 4
Trouble shooting
SPRAYER WILL NOT START
If battery is properly seated and fully charged
If On/Off switch is in the off position
If fuse is blown
SPRAYER WILL NOT PRIME
If pickup tube or discharge hose for restrictions
If you are out of product
For properly charged battery
For vacuum leak in pickup tube
SPRAYER OUTPUT VOLUME REDUCED
If pickup tube or discharge hose for restrictions
Sprayer wand and wand tip for restrictions
Material is too high in viscosity
Material is too cold
EXCESSIVE VIBRATION ON SPRAYER
For foreign debris on sprayer assembly or bucket
For loose hardware on sprayer assembly
Page 13
