Chemical Compatibility
Refer to the following website for a chemical compatibility
chart to ensure that the material you wish to spray is
compatible with the pump components (Viton®,
Santoprene® and Polypropolene).
www.shurflo.com/pdf/industry/CCChart.pdf
C A U T I O N
IT IS YOUR RESPONSIBILITY TO ENSURE THAT THE
MATERIAL YOU ARE SPRAYING IS COMPATIBLE
WITH THE PUMPS COMPONENTS.
Page 12
C A U T I O N
Due to the nature of this unit, it is imperative the unit
is properly cleaned and flushed using the
appropriate fluids as recommended by the chemical/
compound manufacturer. Failure to clean the unit
after each use will result in the failure of the unit and
will result in loss of warranty coverage.
Do not assume fluid compatibility. If the fluid is
improperly matched to the pumps elastomers, a leak
or damage to the pump may occur. Be certain that
the material being sprayed is compatible with Viton
®
Santoprene
®
, and Polypropolyne.
Attempting to spray liquids below the manufactures
recommended temperatures may affect the sprayers
ability to adequately perform. Low temperatures
may affect your materials viscosity.
Do not leave material in unit in between uses
Do not submerge or expose to excessive moisture
Page 5
