Issue 001 - November 2018 | SmithsEP.co.uk | 19
Temperature control for Comfort
(COMF) and Temperature control
for Setback (SETB) enabled
1. Ensure your fused spur is switched ON
2. Ensure the wireless controller is switched ON
3. Switch the upper fan switch to ON
4. Ensure the wireless controller is paired (page 9)
with the heater
5. Set the thermostat to the desired temperature
up to the maximum set during the
installation process
6. Set the middle 1kW switch to ON
7. If you require a faster warm up, also set the
lower 2kW switch to ON
Please note all switches must be in the ON
position to achieve 2kW output
8. If the temperature falls below the minimum
temperature set (SETB) during installation the
heater will switch ON automatically
9. To turn the heater OFF, set the wireless
controller switch to off (heating symbol not
shown on display)
For your safety this Kitchen Heater is fitted with
an automatic overheat protection. If the heater
stops, turn off the power at the fused spur, wait 5
minutes and switch the power back on.
Air Circulation (Summer use)
Set the thermostat to maximum set the fan switch
to ON ensure the 1kW and 2kW switches are set
to OFF. Kitchen Heater will provide a cooling flow
of air.
How to operate – Run back Timer
mode enabled
1. Ensure your fused spur is switched ON
2. Ensure the wireless controller is switched ON
3. Switch the upper fan switch to ON
4. Ensure the wireless controller is paired (page 9)
with the heater
5. Set the thermostat to the desired temperature
6. Set the middle 1kW switch to ON
7. If you require a faster warm up, also set the
lower 2kW switch to ON
Please note all switches must be in the ON
position to achieve 2kW output
8. Press the wireless controller ON switch up
to four times. The display will indicate the
running time of the heater. If the heater
reaches the desired temperature during the
running time, it will switch off
9. To turn the heater OFF, set the wireless
controller switch to off (heating symbol not
shown on display)
Press the wireless controller ON switch up to four
times. The display will indicate the running time of
the heater. If the heater reaches the desired
temperature during the running time, it will
switch off.
For your safety this Kitchen Heater is fitted with
an automatic overheat protection. If the heater
stops, turn off the power at the fused spur, wait 5
minutes and switch the power back on.
Air Circulation (Summer use)
Set the thermostat to maximum set the fan switch
to ON ensure the 1kW and 2kW switches are set
to OFF. Kitchen Heater will provide a cooling flow
of air.
SS2E
Fan on
1Kw on
2Kw on
Off
Off
Off
OFF
OFF
OFF
FAN ON
1KW ON
2KW ON
Fan on
1Kw on
2Kw on
Off
Off
Off
OFF
OFF
OFF
FAN ON
1KW ON
2KW ON
