manualshive.com logo in svg

Smiths Medical CDS 9000, Руководство по эксплуатации

Поделиться
Скачать
Smiths Medical CDS 9000 Скачать руководство пользователя страница 15

Chapter 2:  Description of Controls and Features

Surgivet

®

 Universal CDS 9000 Operation Manual 

2-3

Inhalation Valve

Located on the front of the machine to the left of the Exhalation Valve. This valve opens to allow fresh anesthetic 

gas and oxygen delivery to the patient during inhalation. It also closes during exhalation.

Exhalation Valve 

Located on the front of the machine to the right of the Inhalation Valve. This valve opens to allow exhaled gas to 

circulate through the absorber canister and closes during inhalation to prevent rebreathing of carbon dioxide. 

Bag Port

Located below the Exhalation Valve. The Bag Port is used to connect a breathing bag or a ventilator hose. 

Absorber Canister

Located behind and underneath the Inhalation/Exhalation Valves. It holds absorbent to remove carbon dioxide 

from the re-circulating anesthetic and oxygen.

Universal F-Circuit

Rebreathing circuit used for patients that weigh 7 kg (15 lbs) or more.

Modified Jackson Rees (MJR) Circuit

Non-rebreathing circuit used for patients that weigh less than 7 kg (15 lbs). 

Содержание CDS 9000













































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды