The screensaver allows the pump to conserve battery
power when not in an edit mode or if no keypad buttons
have been pressed for 30 seconds. The pump displays
a blank screen. Press any button on the keypad to turn
on the display, except the PCA dose key when in PCA mode.
Screensaver
Blue text that appears on the screen provides further
instructions for that particular screen.
Blue Text
1.
Open the battery compartment and insert four AA
batteries matching the + and – markings inside the
battery compartment, or insert a rechargeable
battery pack
2.
Close the compartment cover when the batteries
are in place
Insert Batteries
1.
Press and hold the power switch
2.
The pump carries out self-tests and sounds six beeps
when the tests are complete
3.
Home screen is displayed
Power On
With the code
1.
Press
or
until the first digit of the code is shown
2.
Press Select to advance to the next digit
3.
Repeat with the second and third digits then press
Select or Accept Value
With the key
1.
Insert into the lock and turn
counterclockwise
Unlocking the Pump
