3 | SmithsEP.co.uk | Issue 001 - September 2018
Technical Documentation waterfan HEATER
v201803
3. GENERAL INFORMATION
HEATER heating and ventilation devices are manufactured in compliance with standards concerning quality, ecology, utility and
work comfort.
HEATER devices are delivered ready-to-use in a cardboard package that is to protect from mechanical damages. The package
consists of: the device, the Manual (Operation and Maintenance Documentation) and Guarantee. If the optional automatic
control ordered, it shall be delivered in a separate package. Make sure all the aforementioned elements are in the package
immediately after the delivery. In the absence of any element, please fill in the suitable carrier document.
4. ASSEMBLY
Prior to any installation procedures, take the following aspects into consideration: easy access for maintenance works, access to
water and electrical installation, appropriate air distribution in a room.
Every HEATER unit is equipped with a set of 3 interchangeable color inserts; in order to change the color, remove the insert
from the front panel and place the desired one back in place.
*It is advisable to mount the device to the wall or the ceiling on original mounting brackets, supporting mount pins (not delivered
with the device) or supporting constructions (shapes and dimensions of the supporting construction may be individually
designed in compliance with durability and strength requirements).
In case of mounting to the ceiling, pay attention to the fact that air-release/venting of the device may be difficult so it is advisable
to place vent at the highest point of the pipework.
The device may be mounted to the wall with the use of a mounting bracket at the angle of 0°, 30° or 60 °. A mounting bracket
holder is made of curved profile. It has two holes for vertical assembly. Assembly to the wall and/or to the ceiling is possible at
different angles but it requires making necessary holes in the holder.
ATTENTION !
!
Przed Before mounting read the manual carefully and adhere to the rules concerning the mounting procedures. Not
applying may result in inappropriate functioning of the device and the loss of the guarantee rights.
!
Pay special attention when working with electrical elements of the device.
!
Any installation operations must be carried out by qualified persons with appropriate authorizations
