Smith's Heating First Solano, Инструкция по установке, пусконаладке и эксплуатации

Страница: 4 / 16

4 | SmithsEP.co.uk | Issue 001 - September 2018
Technical Documentation waterfan HEATER
v201803
H TG-0001_0 7 _z e _s zpilkami
W
AGA:
A
2
A
RKUSZ 1 Z 1
S
KALA:1:10
N
R RYSUNKU
T
YTU Ł :
P
OPRAWKA
N
IE SKALUJ RYSUNKU
M
ATERIA Ł :
D
ATA
P
ODPIS
I
MI Ę I NAZWISKO
S
T Ę P OSTRE
K
RAW Ę DZIE
W
YKO Ń CZENIE:
C
HYBA Ż E OKRE Ś LONO INACZEJ:
W
YMIARY S Ą W MILIMETRACH
W
YKO Ń CZENIE POWIERZCHNI:
T
OLERANCJE:
L
INIOWA:
K
Ą TOWA:
Z
.JAKO Ś CI
W
YPROD.
Z
ATWIER.
S
PRAWDZ.
N
ARYS.
3. INSTALACJA ELEKTRYCZNA
NOTICE !
! To sustain proper functioning of the device keep a safe distance– 200mm from its sides and 300 mm from its
backside (from the fan)
Mounting bracket to the heater
The bracket set consist of: a holder, two
sleeves, two M8 screws and washers. In
order to mount the bracket, drill two Ø12-
13mm holes in places visibly marked on
the casing. Insert sleeves into drilled
holes and place the bracket in. The
included holder must be screwed with M8
screws with washers.
Installation of mounting pins
To mount the heater to the ceiling, use
M8 mounting pins. Drill two Ø8-9mm
holes in places visibly marked on the
casing. Mounting pins may be screwed
into the frame not deeper than 20 mm.
.
Assembly of HEATERMIX air mixer
To mount HEATERMIX air mixer to the
ceiling, use M8 mounting pins. Drill two
Ø8-9mm holes in places visibly marked
on the casing. Mounting pins may be
screwed into the frame of a heat
exchanger to the maximum depth of
20mm. Mounting pins and connecting
elements are not included with the unit.