Smith's Heating First Hydronic SS2E W, Руководство пользователя

Страница: 7 / 24

7
Space Saver 12-volt models are primarily intended
for installation in the space beneath bathroom
cabinets, bath panels and other high humidity
areas. 12-volt models are safe to operate with wet
hands.
Space Saver is designed for use on standard two-
pipe pumped central heating systems. Pipes are
15mm and either may be used a flow or return.
This product is not suitable for one-pipe systems.
The transformer must be located outside the
bathroom or high humidity area. The 450mm lead
attached to the transformer must be connected to
the fused spur (mains supply).
You will need to provide a cable (twin core 0.5mm
2
for lengths up to 6 metres, 1.0mm
2
for longer
lengths) to connect the terminals on the product
to the transformer. The two single-pin male
connectors are provided to connect this cable to
the transformer terminals.
Space Saver is classified as a fixed appliance and
electrical connection should be via a double pole
3A fused spur with a minimum contact gap of 3mm.
The fused spur should be close to the transformer
and be accessible after completion of the
installation. This product must not be earthed.
To ensure adequate airflow, a minimum clearance
of 20mm between the top of the product and any
shelving is essential. To avoid the possibility of
vibration, this product must be installed on a flat
even surface. There must be no rear access to the
product after completion of the installation.
To conform with Building Regulations Part L (Part J
in Scotland), a remote room thermostat (Smith’s
Part No. RT002) can be used in conjunction with
this Space Saver fan convector.
The flexible installation hoses supplied are suitable
for use with either 15mm diameter copper pipe or
15mm cross-linked polythene barrier pipe to
BS 7291. For all other types of pipes we
recommended the use of compression type
fittings.
Please note the guarantee may be invalidated if
this product is not installed and used in
accordance with this guide.
The following items should be included in the carton:
v v Product with fixed white grille.
v v Transformer with 450mm of pre-wired mains cable.
v v Two single-pin male connectors.
v v
Fixing screws (2).
v v One pair flexible installation hoses.
Overlay grilles which fit over the fixed white grille are available in different colours and finishes. Please
consult the price list for details. In the event of items missing or visible damage, please contact us on
01245 324560.
We would be most grateful if you would leave this Installation & User Guide and the
Guarantee Registration Card with the owner of the property.
SS5 W/12V