Chapter 3
14
Smithco Spray Star 3180 SmarTrax™ MD Installation Manual
Reinstall the Steering Wheel
FIGURE 10.
Steering Wheel Alignment
1.
Align one spoke of the machine’s steering wheel with a spoke on the installed ring gear (P/N 063-4001-
011).
2.
Install the steering wheel on the male spline adapter.
3.
Install the Woodruff key from the spline adapter assembly in the notch on the male spline adapter.
4.
Install the nut from the spline adapter assembly on the protruding male spline adapter.
FIGURE 11.
Steering Wheel Cap Reinstalled
5.
Replace the steering wheel cap.
Install the Mechanical Drive
Note:
Depending on the machine’s configuration, it may be necessary to install the anti-rotation pin in the
mechanical drive’s casing after the mechanical drive is installed instead of before as indicated in
the instructions below.
Nut from Spline
Assembly Installed
Steering Wheel Spoke
Aligned with Ring Gear
Assembly Spoke
Содержание Sprayer Star 3180 SmarTrax MD
Страница 4: ...Table of Contents ii Smithco Spray Star 3180 SmarTrax MD Installation Manual ...
Страница 12: ...Chapter 2 8 Smithco Spray Star 3180 SmarTrax MD Installation Manual ...
Страница 26: ...Chapter 4 22 Smithco Spray Star 3180 SmarTrax MD Installation Manual ...
Страница 28: ...Index 24 Smithco Spray Star 3180 SmarTrax MD Installation Manual ...