Smithco Sand Star Zee 45-501-A, Запчасти и обслуживание

Страница: 55 / 69

53
Accessories
45-509 SCARIFIER PARTS LIST
REF# PART# DESCRIPTION QUANTITY
1 HB-38-16-125 Bolt
3
/
8
- 16 x 1
1
/
4
9
HW-38 Washer
3
/
8
9
2 13-114 Digger Blades 9
3 HNTL-38-16 Lock Nut
3
/
8
- 16 9
4 45-621 Attachment Lift Assembly 1
5 HB-12-13-150 Bolt
1
/
2
- 13 x 1
1
/
2
4
HNTL-12-13 Lock Nut
1
/
2
-13 4
6 45-599 Short Lift Strap (Ball field Application) 2
7 45-571 Long Lift Strap (Golf Course Application) 2
8 HCP-12-200 Clevis Pin
1
/
2
-20 2
HHP-18 Bridge Pin
1
/
8
2
INSTALLATION INSTRUCTIONS
1� Digger blades (Ref 1) should be bolted to the attachment lift (Ref 4) using the
3
/
8
hardware (Ref 1 and
3) supplied�
2� Attach lift straps (Ref 6 or 7) to the attachment lift using
1
/
2
-13 bolts and lock nuts (Ref 5)� Only tighten
enough so straps can move freely� If the attachment is being installed on a 45-500 Ball Field ZTR,
use the short lift straps� If the attachment is being installed on a 45-501 Golf Course ZTR, use the
long lift straps�
3� Using the
1
/
2
" clevis and bridge pin (Ref 8), attach the attachment lift assembly to the attachment
mounts on the main frame� Then connect the lift straps (Ref 6 or 7) to the arms of the attachment lift us-
ing
1
/
2
-13 bolts and lock nuts (Ref 5)� Only tighten bolts until they until they will still rotate in the holes�
DO NOT OVER TIGHTEN�
TO LOWER SCARIFIER
1� Place detent pin in depth hole�
2� Push left pedal down�
3� Push lock arm inward (toward your leg) and release foot pedal slowly�
4� Lift rod will stop at detent pin�
TO LIFT SCARIFIER
1� Push foot pedal all the way down and lock arm, which is spring loaded, will spring into locking slot�
MORE PERMANENT DEPTH POSITION
CAUTION: DO NOT USE DURING TRANSPORT� DAMAGE COULD BE CAUSED TO SCARIFIER�
1� Push pedal down�
2� Push lock arm inward (toward your leg) and release foot pedal slowly�
3� Line up slot on lift rod with depth hole and place detent pin threw the selected hole and slot on the lift
rod�
4. Scarifier will stay in that position until detent pin is removed.
5. To remove detent pin - apply pressure to he foot pedal, pull detent pin out. Push foot pedal to floor until
lock arm springs into locking slot�