Smith SPS8, Руководство пользователя и список запчастей

Страница: 3 / 33

SMITH Manufacturing 1-800-653-9311 www.SmithMfg.com 1/2009 3
SPS8
INTRODUCTION
Congratulations on purchasing the SPS8™ Surface Preparator from SMITH Mfg. Company.
Your machine will:
• Clean surfaces impacted by grease, oil, plastics, tars, resins, tile adhesives, ice and more
• Plane or mill asphalt and concrete surfaces
• Remove high spots in curbs and gutters
• Eliminate trip-hazards on concrete sidewalks
• Mill areas for rumble strips
• Clean out cracks and joints
• Create anti-slip patterns in walkways and barns
• Prepare surfaces for new coating applications
• Permanently remove all road and surface coatings to include:
epoxy, urethane, thermoplastic, paint, glue-backed tapes and more...
• Groove-inlay asphalt for striping
BEFORE START-UP, READ THIS...
Please read all operating instructions, including the provided engine manual and be completely
familiar with your equipment before operating. When in doubt, please contact SMITH Manufacturing
or your local dealer for operation details.
This Owner’s Manual will guide you through the removal process, from start to finish, and show you
how to care for your machine.
UNCRATING YOUR EQUIPMENT
When you uncrate your equipment, make certain that the machine has not been
damaged and that all fasteners and guards are properly tightened.
Your machine may not have been shipped assembled with cutters and other accessories.
Assembly may be required.
Remember: Only authorized, experienced and properly
trained personnel should operate this equipment.
Operating personnel should practice safety at all times
and wear protective gear (gloves, goggles, safety vests,
ear plugs, steel-toe shoes, etc.)