SMITH Manufacturing
1-954-941-9744 www.SmithMfg.com
SMITH Manufacturing
1-954-941-9744 www.SmithMfg.com
VERSION 5/2014
FS150
REQUIRED SAFETY
EQUIPMENT
When using this tool the following
safety equipment MUST be worn!
If you do not have this
DO NOT USE THE MACHINE
SAFETY GLASSES
SAFETY GLOVES
SAFETY MASK
SAFETY GUIDELINES
-PNEUMATIC-
•
Read all instructions before using the tool. all
operators must be fully trained in its use and
aware of these safety rules.
•
DO NOT exceed the Maximum working
pressure of 100psi
•
Use ONLY compressed air at the
recommended conditions
•
If the tool appears to malfunction, remove
from use immediately and arrange for service
and repair
•
If the tool is used with a balancer or other
supporting device ensure that it is fixed
securely
•
Always keep hands away from the working
attachment fitted to the tool
•
The tool IS NOT electrically insulated.
NEVER use tool if there is any chance of it
coming into contact with live electricity
•
Always when using the tool adopt a firm
footing and/or position and grip the tool firmly
to be able to counteract any forces that may
be generated while using the tool
•
Use only the correct spare parts. Do not
improvise or make temporary parts
•
Do not lock, tape, wire etc the ON/OFF valve
in the run position. The trigger/lever must
always be free to return to the off position
when it is released
•
Always shut off the air supply to the tool and
depress the trigger/lever to exhaust air from
the feed hose before fitting, adjusting or
removing the working attachment
•
Check hose and fittings regularly for wear,
replace if necessary
•
Always use a suitable vacuum cleaner or
dust extraction unit
3
