Smith-Root PES, Руководство пользователя, Страница: 17 / 24

USER’S GUIDE
15 2015
1. TIMER RESET -
Pressing SELECT in this
menu will reset the seconds counter in
the Status Display to 0.
2. QUICK SETUP - Pressing SELECT will
initiate the Quick Setup sequence.
3. DUAL MODE - Pressing SELECT will
toggle the current setting of Dual Mode;
enabling or disabling it.
4. POWER LIMIT
- Press SELECT to enter
the power limit menu where the max
power setting can be changed. Pressing
Select in this menu will return the display
back to Status Display.
5. LIMIT MODE - In Power Limiting
or Thermal Fold-back the power is
reduced by changing the voltage or
the frequency, while retaining the pulse
width. This menu allow the selection of
which method us used. Note: Frequency
limiting is not possible with a DC Pulse.
6. THERMAL FOLDBACK - If the PES ® gets
too hot this mode, if enabled, will reduce
the output power like Power Limit mode.
Press SELECT in this menu to toggle the
current setting of this mode: Enabling or
Disabling it.
7. LOW OUTPUT CURRENT -
As a safety
feature; If the PES ® output is activated
but the unit does not detect any
significant output current the output
will be shut off and an error message
displayed. In this Menu the test for Low
Output Current can be Disabled. Press
SELECT in this menu to toggle this
system setting; Disabling or Enabling it.
8. EXTENDED TESTS -
Pressing SELECT
in this menu item will initiate a basic
test of the PES
®
unit. This should only
be performed either by or under the
direction of a engineer or technician.
9. FACTORY DEFAULTS - Pressing SELECT
in this menu item will set the current
waveform and all stored waveforms to
the Default Factory Setting.
10. HISTORY - Press SELECT in this menu
item to access the event history of the
PES
®
unit. Press the up or down arrow
buttons to go forward or backward in
history. Press SELECT or Menu to return
to the Status Display
SYSTEM MENU ITEMS ARE (IN ORDER):