11
12
smithandnoble.com
800.248.8888
UNPAIR THE REMOTE
DISABLING UNUSED CHANNELS
1. Press SETTING Button (P1) on the motor
for 2 seconds. The shade will jog once and
sound a long beep.
2. Press the STOP button for 2 seconds. The
shade will jog twice and sound 3 beeps. The
motor has been unpaired successfully.
NOTE:
If the STOP button is not pressed within
10 seconds, the shade will exit the unparing
mode automatically.
The 15 channel remote has the option of
turning off unused channels, making channel
selection easier.
Press and hold both Channel UP and Channel
DOWN buttons until the LED screen displays
the number 15.
Scroll through the channels to select the
required number of channels (between 1-15).
Press the STOP button once to confirm
selection. The remote will now only display the
number of channels selected.
Follow the same process if you need to re-add
channels.
CHANNEL
DISPLAY
UP
STOP/
FAVORITES
DOWN
CHANNEL UP
CHANNEL DOWN
REMOTE FRONT
CHANNEL
DISPLAY
UP
STOP/
FAVORITES
DOWN
CHANNEL UP
CHANNEL DOWN
REMOTE FRONT
SETTING & USING A FAVORITE POSITION
If there is only a single shade on the
channel proceed to SETTING A FAVORITE
POSITION below.
If there is more than one shade on the
channel, all shades on that channel will need
to be unpaired (see UNPAIR THE REMOTE).
Follow the steps in PAIR THE REMOTE
to
pair only the shade
that needs a favorite
position set. Then proceed to SETTING A
FAVORITE POSITION.
Setting a Favorite Position
Check both upper and lower limits are set.
Use the UP or DOWN buttons to position
the shade at the desired “favorite” position.
Press P2 on the back of the remote until the
shade jogs once and beeps.
Press the STOP button until the shade jogs
once and beeps once then release.
Press the STOP button again and the shade
will jog twice and sound 3 beeps. Your
“favorite” position is now set.
Using a Favorite Position
Press the STOP/FAVORITE button for 2
seconds. The shade will automatically move
to the set “favorite” position.
Removing a Favorite Position
Press the P2 button on the back of the
remote until the shade jogs once and beeps.
Press the STOP button until the shade jogs
once and beeps then release.
Press the STOP button again and the shade
will jog once and sound a long beep. Your
“favorite” position has now been removed.
CR2450
LITHIUM BATTERY
3V
P2
M
P2
REMOTE BACK
P2
BUTTON
CHANNEL
DISPLAY
UP
STOP/
FAVORITES
DOWN
CHANNEL UP
CHANNEL DOWN
REMOTE FRONT
