7
8
smithandnoble.com
800.248.8888
PAIRING THE REMOTE
Your shades will need to be paired to the
remote prior to operati ng your shade.
See Pair
the Remote below.
Pair The Remote
This remote control has 15 channels. Before
pairing the remote, determine which shade(s)
you want on which channel. All shades
paired to a remote will also automati cally be
programmed to the “ALL” channel.
It is recommended to only pair one shade per
channel
unless it is absolutely necessary to
group shades other than the "ALL" channel.
This simplifi es adjusti ng limits and setti ng
favorites.
If a batt ery is not already installed in the
remote, follow the instructi ons REPLACE
BATTERY IN REMOTE.
1. Press SETTING butt on on the motor for 2
seconds. The shade will jog once and sound a
long beep.
2. Press the STOP butt on for 2 seconds. The
shade will jog twice and sound 3 beeps. The
motor has been paired successfully.
NOTE:
If the STOP butt on is not pressed
within 10 seconds, the shade will exit the
paring mode automati cally.
Repeat steps 1-2 to pair remaining shades to
the rest of the channels.
CHANNEL
DISPLAY
UP
STOP/
FAVORITES
DOWN
CHANNEL
RAIL SELECTOR
REMOTE FRONT
CR2450
LITHIUM BATTERY
3V
P2
M
P2
REMOTE BACK
P2 BUTTON
SETTING
BUTTON (P1)
LED LIGHT
CHARGING PORT
SHADE MOTOR
OPERATING THE REMOTE
Select the desired channel with the CHANNEL
butt on.
Raise and Lower Shade
Press the UP or DOWN butt ons to raise or
lower the shade.
Press the STOP butt on to stop the shade at the
desired positi on.
CHANNEL
DISPLAY
UP
STOP/
FAVORITES
DOWN
CHANNEL UP
CHANNEL DOWN
REMOTE FRONT
