19
20
smithandnoble.com
800.248.8888
SHORTCUTS
SETTINGS
STEPS
Pairing
SETTING Button (P1) for 2 seconds (1 jog & 1 beep) → STOP
for 2 seconds (2 jogs & 3 beeps)
Switch Rotating Direction
SETTING button (P1) until 3 jogs → release SETTING button
(3 beeps)
Setting Upper Limit
UP + STOP 5 seconds (1 jog & 1 beep) → adjust limit → UP +
STOP 2 seconds (2 jogs & 3 beeps)
Setting Lower Limit
DOWN + STOP 5 seconds (1 jog & 1 beep) → adjust limit →
DOWN + STOP 2 seconds (2 jogs & 3 beeps)
Add / Remove Favorite
Position
P2 for 2 seconds (1 jog & 1 beep) → STOP (1 jog & 1 beep) →
STOP (2 jogs & 3 beeps)
Jog Mode & Running
Mode Switch
UP + DOWN 5 seconds (1 jog & 1 beep) → STOP
Add or Remove
Additional Remote
SETTING Button (P1) on exisiting remote for 2 seconds
(1 jog & 1 beep) → STOP on new remote for 2 seconds
(2 jogs & 3 beeps)
Adjust Speed -
Acceleration
P2 (1 jog & 1 beep) → UP (1 jog & 1 beep) → UP
(2 jogs & 1 beep)
Adjust Speed -
Deceleration
P2 (1 jog & 1 beep) → DOWN (1 jog & 1 beep) → DOWN
(2 jogs & 1 beep)
INSTALL SOLAR PANEL
INSTALL SOLAR PANEL
Connect Solar Panel to Motor
After the shade is installed, plug the
solar panel into the motor recharge
port.
Bracket Method
Connect the sliding bracket and the L-shape
bracket using the two screws and nuts. Do
not overtighten to allow for easy adjustment
to the solar panel mounting height if needed.
Ceiling mount the L-shape bracket to the
window frame between the glass and the
shade.
Adjust the mounting height by moving
the sliding bracket up and down. Once
positioned at the desired height, tighten the
two screws to fix the position.
Click the solar panel to the bottom of the
sliding bracket.
If space is limited it may be easier to
attach the brackets to the solar unit before
screwing the brackets in place.
SETTING BUTTON
(P1)
LED LIGHT
CHARGING PORT
SHADE MOTOR
