Smith & Nephew TC-PLUS Revision Скачать руководство пользователя страница 55 | Manualshive

Страница: 55 / 98

Smith & Nephew TC-PLUS Revision Скачать руководство пользователя страница 55

55

If a patella insert is indicated, the patella ( page 59 ) of the

TC-PLUS™ knee system is used, because the geometry of the
patella cavity is designed for this implant.

The press-in instrument is mounted on the patella gripper
with lock. The back of the patella component is coated with
cement and the three holes for pins in the patella are filled
with cement. The patella component is positioned manually
with the leg stretched and pressed in with the patella gripper
with lock and press-in aid in position. The excess cement is
carefully removed. The gripper is left until the cement has
fully hardened.

After  manual  placement  of  the  PE  retaining  screw  into
the tibial  insert,  the  PE  retaining  screw  is  tightened  with
the screwdriver  with  torque.  The  required  torque  is
reached when the line reaches the PE position ( 2.5 Nm ).

Important

The screwdriver with torque is maintenance-free. However,
make sure that the marking is at Position «0» when it is not
under tension. Otherwise the screwdriver with torque must
be returned.

Implanting the cemented patellar component

«
...
53
54
55
56
57
...
»

Содержание TC-PLUS Revision



































































































Отзывы:

Нет отзывов