Smith & Nephew TC-PLUS Revision Скачать руководство пользователя страница 44 | Manualshive

Страница: 44 / 98

Smith & Nephew TC-PLUS Revision Скачать руководство пользователя страница 44

44

According

to

the

predetermined

valgus

angle,

the

corresponding femoral valgus adapter ( «4°», «6°» or «8°» )
is inserted on the femoral reamer guide.

The femoral valgus adapter is inserted into the femoral
reamer guide, so that depending on which side is the
operation, the mark «LEFT» for left knee or «RIGHT» for right
knee is visible on the arrow «ANTER

IOR

T

»

.

The reamer bushing with the smallest diameter («Ø10») is
inserted into the femoral valgus adapter.

Important

Reamer bushings and reamers in diameter «Ø10»,
«Ø12», «Ø14», «Ø16», «Ø18» and «Ø20» are available.

Reamers are used carefully and in progressive stages

(

starting with «Ø10») with

use of the corresponding

bushing, to ream to the required stem diameter and depth.

Important

The  depth  indicator  is  on  the  reamer:  observe  the laser
markings  when  using  this  technique.  The  recessed notch
markings  are  for  the  IM  application  and  are described  in
the corresponding surgical technique.

When using cemented stems, the Ø 12 mm reamer is used
to drill to the desired depth. Cemented stems are available
in 80 mm, 110 mm and 150 mm lengths.

The box is prepared medially and laterally with the
oscillating saw.

Important

The medial and lateral saw cuts are aligned at an inclination
to make it easy to place the IM-guided femoral component
(valgus) in the correct position.

Preparing the femoral box

«
...
42
43
44
45
46
...
»

Содержание TC-PLUS Revision



































































































Отзывы:

Нет отзывов