POSYC 3303 industrial PC
Installation, use and maintenance manual - EN
Ver. 1.02
26
8 Device use
8.1 Touch screen
The use of the POSYC computer is very similar to a normal desktop computer; the only substantial difference
is the touch screen pointing device which, however, allows an even more intuitive use of the computer.
CAUTION
ATTENTION
To operate the touch screen, a slight pressure is sufficient (this has the appearance of any glass plate) to com-
mand the operating system pointer to move below the area where the pressure has been exerted. Depending
on the software settings, the touch screen simulates dragging, clicking, double clicking and right mouse button.
Refer to the software manual for further details.
8.2 CFast card
The CFast card of the POSYC replaces the traditional hard disk, thus ensuring better shock tolerance and
longer life of the device, also in case of continuous working cycles.
The positioning of the flash CFast card and the simplicity of extraction / insertion allow its quick replacement
both in case of failure and off-line software update.
CAUTION
Operate the touch screen sensor only with your fingers or soft and not sharp objects, other-
wise you will damage it.
Utilisez le capteur d'écran tactile uniquement avec vos doigts ou des objets mous et non
tranchants, sinon vous risqueriez de l'endommager.
To avoid computer failure and/or data loss to the CFast card, the replacement of the same
must be done exclusively at POSYC turned off.
