smirthwaite INDIGO HILO, Инструкция по эксплуатации

Страница: 18 / 26

16
6.2 FLIP-UP FOOTREST
6.2.1 FITMENT
The foot rest assembly is attached to the underside of the seat base by 6 screws (M6 x
16mm). Four of these will already be fitted to the underside of the seat by the factory
located toward the front of the chair (22).

Using the hex key provided, ensure the four screws fitted to the underside of the seat
are loose.

Offer up the footrest (23) to the
underside of the seat and slide
forward. The slots in the front
of the footrest are to engage
with the screws mentioned in
the previous step.

Insert 2 further screws (24) at
the rear and tighten using the
supplied hex key.

Tighten the 4 screws at the
front of the footrest using the
supplied hex key.
22
22
Note: Electric HiLo Chassis
not shown for clarity
23
24