smirthwaite INDIGO HILO, Инструкция по эксплуатации

Страница: 16 / 26

14
6.1 HEADRESTS
6.1.1 FITMENT

Insert the stem of the headrest (14)
into the socket on the rear of the seat
back (15).

Take the supplied M6 x 20mm screw
(16) and washer (17) and insert the
screw through the aperture (18) and
into the insert located in the head rest
stem.

Tighten the screw with the supplied
4mm hex key.
6.1.2 HEADREST HEIGHT
The height of the headrest can be altered
in 2 stages.

Using the supplied hex key, loosen the
bolt on the back of the padded
headrest assembly (19).

Slide the headrest to the desired
position and tighten the bolt to secure
in place.

Using the supplied hex key, loosen the
M6 x 20 screw used for the fitment of
the headrest assembly (16)

Slide the whole headrest assembly to
the desired position and tighten the
screw to secure in place.
14
15
16
17
18
19
16