smirthwaite Independent, Инструкция по эксплуатации

Страница: 21 / 42

Original Standers
20
5.3 KNEE BLOCK
The Knee block assembly can be
adjusted in height, width (pitch), and
angle.
5.3.1 HEIGHT
•
Loosen the handwheels (C)
located on each side of the frame.
•
Slide the assembly to the desired
height
•
Re-tighten the handwheels (C)
5.3.2 WIDTH (PITCH)
•
Two handwheels can be found on
the rear of the knee block
assembly
•
To adjust the position of a knee
block
simply loosen the
appropriate handwheel, and move
the knee block to the desired
position.
•
Ensure the handwheel(s) (C) are
re-tightened before use.
5.3.2 FINE ANGLE ADJUSTMENT
•
Fine angle adjustment of the knee block assembly can be achieved by twisting
the assembly whilst handwheels (C) are both loose.
•
Ensure both handwheels are re-tightened when adjustment is complete
5.3.3 OPTIONAL KNEELING BOX ACCESSORY (Codes KN003-KN005)
•
This accessory can be supplied separately or factory fitted.
•
It replaces the knee block assembly
•
It attaches to the Lay Prone stander using the handwheels provided, and is
adjustable for height (D) and angle (E)
C
D
E