SMI RED250mobile, Руководство пользователя

Страница: 91 / 176

© 2015 SensoMotoric Instruments (SMI)
Setting Geometry Measurements
Page 85
Using Manual Settings
To manually enter the measurement settings:
1. On the Geometry tab, select the type of display from the Select
Display dropdown.
2. If you have not done so already, create a new profile, such as
"Experiment Laptop". See Creating Profiles.
3. If a second display is connected to the PC or Laptop, use the 1-2
button and select from the Select Display dropdown display that will
be used with the RED250mob ile Eye Tracker . See Using Multiple
Displays.
4. Determine the Depth measurement and enter the measurement in
the Depth [mm] field. See Setting Depth and Height.
5. Determine the Height measurement and enter the measurement in
the Height [mm] field. See Setting Depth and Height.
6. Determine the Screen Width and Height measurements and enter
these measurements in the Screen Width [mm] and Screen Height
[mm] fields. See Setting Screen Width and Height.
7. Select from 15 , 20 or 25 to enter the angle value of the Mounting
Bracket into the RED Angle [Degree] field. See Setting RED Angle.