SMI RED250mobile, Руководство пользователя

Страница: 153 / 176

© 2015 SensoMotoric Instruments (SMI)
Additional Information
Page 147
To establish a connection, go to Experiment Center
TM
's Global Settings
dialog. Uncheck Use One PC Setup . Enter the IP address and port found in
the Info tab of iViewRED in the respective fields for the iView X System in
Experiment Center
TM
.
A firewall may block the communication. Consult Experiment Center
TM
's
User Guide on how to unblock the firewall and for further information.
15.7.2Interfacing with Third Party Applications
If third party application is running on the iViewRED PC (the PC that the
RED250mob ile Eye Tracker is connected to), the programs can be
connected using the
localhost
address. See Application Running on
iViewRED PC.
When iViewRED is running on a PC different from the PC that the
application is running on, a network connection needs to be
established. See Application Running on Second PC (Dual PC Setup).
15.7.2.1Application Running on iViewRED PC
When iViewRED and the application interacting with iViewRED are
running on the same PC, the connection can be automatically initialized
if the application uses the SDK command
iV_ConnectLocal
. In this
case, no further settings are required.
If the application uses the SDK command
iV_Connect
, a network
connection will need to be established. In this case, locate the part of
your application where a network communication can be configured. In
an existing application, this would use the command
iV_Connect
(SendIPAddress, SendPort, RecvIPAddress, ReceivePort)
.
When both applications are running on the same PC, use a
localhost
network connection. Typically, this is realized using the IP address
127.0.0.1
for both
SendIPAddress
and
RecvIPAddress
. You can find
IP Address and Port of the iViewRED PC on the Info Tab. These will
need to be inserted for
SendIPAddress
and
SendPort
.
RecvIPAddress
and
ReceivePort
are determined by the PC running