SMI RED250mobile, Руководство пользователя

Страница: 127 / 176

© 2015 SensoMotoric Instruments (SMI)
Performing a Calibration
Page 121
11.8 Recalibrating on a Point
Recalibration on a calibration point can be done if the calibration results
indicate that the participant did not focus sufficiently on an individual
calibration point.
When a calibration point has been recalibrated, the entire calibration will
then be adapted afterwards in one of the following ways:
The data from the selected point with be replaced with new data from
the recalibrated point.
The data from the previously missing point will be included in the
calibration model.
Recalibration can only be done after a calibration has
been performed, and only if no calibration settings
were changed or if another tab was selected. If another
tab was selected or if the calibration settings were
changed, the display will be turned to
Calibration Point
Setting mode and recalibration is no longer possible.
To recalibrate on a specific calibration point:
1. Using the mouse, move over the point to be recalibrated.
2. A floating hint will appear - Click to recalibrate .