SMERI S-VTX, Инструкция по эксплуатации

Страница: 22 / 37

20
Menu Description Setting method
Contrast
1~5
Normal set as 3.
Menu Selection
Protection ON / OFF
Press “M” button for
2 seconds to change
Min Alarm(%) Set low alarm value. Unit: % Direct Input
Max Alarm(%) Set high alarm value. Unit: % Direct Input
Meter Size View meter size setting. Read Only
Flow mode
Liquid Qv: Liquid volume Liquid Qm:
Liquid mass Gas Qv: Gas volume
Gas Qm: Gas mass Steam Qv: Steam
volume Steam(P/T): Steam mass
Sat_Steam(T): Saturated steam mass
(temperature compensation)
Sat_Steam(P): Saturated steam mass
(pressure compensation)
Menu Selection
Unit-Qv
Unit-Qm
Volume units supported: Nm3/h,
Nm 3 /m, Nm 3 /s, l/s, l/m, l/h,
m 3 /s, m 3 /m, m 3 /h, m 3 /d, Scf/s, Scf/m,
Scf/h, cf/s, cf/m, cf/h,
USG/s, USG /m, USG /h, UKG/s, UKG /m,
UKG /h, bbl/h, bbl/d
Mass units supported : g/s
，
g/m
，
g/h
，
kg/s
，
kg/m
，
kg/h
，
kg/d
，
t/m
，
t/h
，
t/d
，
lb/h
，
lb/d
Note: accumulative flow unit based on
the instant flow unit.
Menu Selection
Range 100%
Set the Qmax value for selected flow
mode (= 20 mA)
Direct Input
Density (kg/
m 3 ) Density
(g/c m 3 )
Set gas density (unit: Kg/m 3 ) Set liquid
density (unit: g/cm3)
Direct Input
Gauge
Pre.(KPa)
Use for gas or steam measure. Unit:
kPa.
Direct Input