7596040 – MANUALE WO-20 EN 21052018 REV.1
- 8 -
2.5
TECHNICAL SPECIFICATIONS
WO-20
TECHNICAL SPECIFICATIONS
Height x Width x Depth (mm)
150x490x550
Weight (kg)
25
Approved Decibel Level under normal operating conditions (db)
<70
Membranes (nr. 2)
TWG3A1-1100410
Activated carbon pre-filtration
Y21408BSG
Tank pre-charge (MPa)
0.1
WATER SUPPLY SPECIFICATIONS
Water type
Drinkable
Minimum water temperature (°C)
5
Maximum water temperature (°C)
30
Minimum inlet flow rate (l/h)
600
Maximum inlet pressure (MPa)
0.6
Minimun inlet pressure (MPa)**
0.15
POWER SUPPLY SPECIFICATIONS
Power supply type
MON GROUND
Nominal power (V)
230
Frequency (Hz)
50
Absorbed current (A)
2.4
Power (W)
690
Fuse type (electronic board)
F3.15A
PERMEATE WATER SPECIFICATIONS
Output maximum flow rate
c.a 120
Recovery percentage (%)
Vedi §3.2
WARNING
* The percentage of dissolved salts and other rejected elements is influenced by the quality of
the water, the temperature, the pressure and the totality of dissolved salts and it is different
depending on the types of salts or elements.
** Dynamic: pressure measured in the inlet with the RO system in operation.
WARNING
The quality of the water produced (permeate) is influenced by the quality of the raw water,
the temperature, the pressure and the totality of dissolved salts.
The treatment of particularly turbid water in presence of organic substances or in suspension
can cause the early clogging of prefilters and / or membranes with and loss of water flow
rate and quality.
WARNING
The use of the machine outside the limits indicated is considered IMPROPER USE.