Smeg WO-20, Руководство по эксплуатации и техническому обслуживанию, Страница: 5 / 24

7596040 – MANUALE WO-20 EN 21052018 REV.1
- 5 -
1
GENERAL INFORMATIONS
1.1 MANUFACTURER / ASSISTANCE
BUILDER ASSISTENCE
C.C.I.A.A. : PD352571 Registration
Personal Data of the Retail Seller
1.2 CERTIFICATION
The system was manufactured in compliance with the following EU Directives:
Machines
2006/42/EU
Low Voltage 2014/35/EU
Electromagnetic Compliance 2014/30/EU
RoHS2 2011/65/EU
1.3 PURPOSE OF THE MANUAL AND ITS CONTENTS
This manual was written in order to supply the user with all the necessary information needed to facilitate
the autonomous and safe operation of this device. The manual contains information that is critical to the
operation and regular maintenance of the machine.
WARNING
This manual is addressed both to the users, for the parties expressly stated, and to the
technicians qualified for maintenance of the machine.
Before carrying out any work on the machine, both users and installers and qualified
technicians should read carefully the instructions contained in this manual.
Users can only perform the operations described in this manual and they have not to perform
tasks reserved to maintenance or qualified technician.
WARNING
All extraordinary maintenance operations must be done by qualified personnel only.
1.4 CARE AND STORAGE OF THE MANUAL
The instruction manual is an integral part of this device and must be kept nearby at all times, and stored
inside the proper container and, above all, protected from liquids and anything else that could compromise
its readability. The manual contains the declaration of conformity that can not be copy. In case of loss or
damage, a copy can rquired writing and quoting the serial number.
1.5 IMPORTANT SYMBOLS TO REMEMBER
GENERAL WARNINGS
This symbol Indicates warnings or button information regarding the operation of this device.
Please pay close attention whenever you see this symbol.
This symbol Indicates that specialized/portable equipment may be required to adjust or
repair the components of the device.
This symbol Indicates that a visual or in-depth inspection, etc. of the device may be required.
INDICATIONS OF DANGER
This symbol Indicates General cautions; risk to the operator.
This symbol Indicates danger of electrical shock or electrocution.
RESTRICTIONS
This symbol indicates general restrictions.