EN
7
2. INSTALLATION INSTRUCTIONS
Important!
The appliance must be installed by a qualified engineer in compliance with
the relevant regulations.
The washer-dryer is heavy. Take care when lifting it.
2.1 UNPACKING
The unit on flexible mounts is fixed in place for transport using the screws (
A)
on the rear of the washer-dryer, with the relative plastic spacers
(B)
. Once the
screws have been removed, the power supply lead can be used.
1. Undo
all
the screws with a 10 mm spanner
2. Remove
all
the screws (
A
) from the rear
3. Remove
all
the plastic spacers
(B)
WARNING:
It is absolutely necessary to fit
all
(
nr.5
)
the supplied plastic plugs
(C)
in order to avoid
splashes or water penetrating the machine or to
avoid contact with live parts.
Warning!
Do not
turn the appliance upside-down or place it on its sides.
All the transport retainer fittings should be kept in a safe place; they must be
fitted again if the appliance has to be moved around in the future.
A+B
A
B
C
