EN
6
It is necessary to install in the fixed wiring an all-pole disconnection device having
a gap between contacts of at least 3,5mm. After installation the disconnection
device has to be easy to reach.
The connection to the mains must be carried out by a qualified technician in ac-
cordance to the scheme shown below and the regulations in force
L
= brown
N
= blue
= yellow-green
In the event of damage to the supply cord, it has to be replaced by the manu-
facturer or an authorized technical service center in order to avoid any risk.
The manufacturer declines all responsibility
for injury or damage caused by fail-
ure to comply with the above regulations or deriving from tampering with even just
one part of the appliance and the use of non-original spare parts.
Содержание WDF147-2
Страница 1: ...WASHER DRYER INSTRUCTION MANUAL EN ...