EN
18
4.13 STARTING THE WASHING PROGRAMME
1. To start the washing programme after making your personal settings, press the Start
Pause button.
2. Once the cycle has started, the display shows the time remaining before the end of the
cycle and the Start Pause symbol on the display is constantly on.
3. During performance of the washing/drying programme, the symbols which identify the
various phases light up:
4.14 INTERRUPTING OR CHANGING THE WASHING PROGRAMME
The washing programme in progress can be interrupted at any moment:
1. press the “Start/Pause” button for about 3 seconds: the display shows the word PAUS
(for 1 second) alternating with the time remaining until the end of the cycle (for 1 sec-
ond). The Start/Pause light flashes on and off.
Programmes can also be interrupted by turning the programme/temperature setting
knob while the cycle is in progress.
2. To change the washing programme, simply turn the programme knob to select the new
programme; there is no need to set the appliance in pause status. The new cycle will
be carried out completely, beginning from the start. If the tank had already been filled
with water during the previous cycle, the water intake phase will be omitted from the
new programme.
3. To restart the cycle, press the Start-Pause button again.
Cycle phase symbols: Prewash, wash, rinses, final spin and dry.
Содержание WDF147-2
Страница 1: ...WASHER DRYER INSTRUCTION MANUAL EN ...