22
9.4
Choosing the program
SYMBOL
PROGRAM
TYPE OF DIRT
DURATION (*)
Short
Glasses and cups
1 min 30 s
Medium
Glasses, cups and plates with light dirt
2 min 30 s
Long
Very dirty dishes and cutlery
4 min
(*) The cycle duration stated above is guaranteed if the water intake temperature is as stated and recommended
in the "TECHNICAL DATA" table, and in all cases refers to the first cycle performed. For repeated cycles, operating
conditions may vary from installation to installation. If the dishwasher is supplied with cold water, the cycle
duration might increase depending on the intake water temperature and the "thermostop" setting.
If the door is opened when a program is in progress, the program is interrupted; when the door is closed
again the program must be restarted.
Power failure.
If the door is open when power is restored, the display reads “CLOSE” and “°t” flashes; the heating element
stays off for the user’s safety, in order to avoid the risk of burns.
Close the door to resume heating the water in the tank.
9.5
Changing the program
If the master switch is not turned off, the appliance sets on the
last programme performed. To change the program, press the
button of the desired program, the led flashes and the display
reads the program duration.
To confirm hold down for about 2”. The led flashes and the wash
program starts.
If a programme is already running, it can be changed by first switching the appliance to pause status (by pressing one of the
buttons for 2”) and then selecting the programme required.
