21
4. That the filters are in place, the spray arms rotate, and there are no foreign bodies in the
dishwasher.
5. Switch on the master switch (user): the decimal points of both digits appear on the display.
9.3
First use each day (tank and boiler empty)
Door closed and master switch on ON:
Press
and hold for 2/3 seconds, Leds ON/OF light up and
the firmware version and e revision are displayed (F xxx r xxx…);
FILL is displayed afterwards.
Tank filling starts. When the tank is full the display reads “End”
alternating with the last running program (End/P1).
Load the dishes and close the door
Select the program required by holding down one of the three
buttons required for about 2”; the Led of the program flashes.
During the wash, a series of vertical bars on display indicate the
progress of the selected program.
When the program is over, the program led stops flashing and
stays on, the display alternates the run program and “End” (ex.
P2/End).
Unload the dishes
When the door is closed again, the system offers the last
program run.
