Loading the laundry
1.
Open the machine lid by pulling it upwards.
2.
Open the drum
- by pushing the drum flap release (for “
1a
”
and “
1b
”; models as shown on “
1a
” have
a fixed drum flap release which will not
compress when pushed).
- by holding the rear drum flap, sliding back
the slider into arrow direction and pushing
the front flap towards the inside of the drum
until the closing mechanism releases (for “
1c
”).
3.
Place the items of laundry into the drum one
by one. Do not exceed the maximum load
of the programmes indicated in the separate
programme chart.
- Overloading the machine will result in
unsatisfactory washing results and creased
laundry.
- Take care that the laundry does not
overhang the drum; if this is the case, push
the laundry down into the drum so that
there is enough free space to close the
drum flaps properly.
- Do not use the flaps to push the laundry
into the drum.
4.
To close the drum, hold both flaps in the
middle again (picture “
2
”), the rear flap over
the front flap.
ATTENTION
: make sure that the drum
flaps are properly locked - depending on the
model:
- the metal hook must be completely
hooked into the rear door flap - see picture
“
2a
”, or
- all metal hooks must be properly hooked
inside the rear door flap, and the button
must overlap the edge of the rear door flap
- see picture “
2b
”.
- the slider of the front flap must slightly
overlap the rear flap - see picture “
2c
”.
Check that no laundry gets stuck between the flaps,
or between flaps and drum.
GB 7
2
2b
2a
2c
1c
1a
1b