Use
59
EN
Control lock
1. While all the cooking zones are off,
simultaneously turn the two cooking zone
control knobs anti-clockwise to the left
(position
A
).
2. Keep them turned until the symbols
appear on the display.
3. Release the knobs.
In order to remove the control lock repeat
the same operations described previously.
Error codes
If the display shows one of the following
error codes
,
, contact Technical
Assistance.
3.5 Using the ovens
Switching on the multifunction oven
To switch on the multifunction oven:
1. Select the cooking function using the
function knob.
2. Select the temperature using the
temperature knob.
Opening and closing the doors of the
multifunction/side ovens
The multifunction and side ovens are
equipped with a swing door. To open, pull
the door handle towards you. To close,
push the doors until you hear a mechanical
“click”.
The control lock is a device that
protects the appliance from
accidental or inappropriate use.
If the knobs have been kept turned
to the
A
position for more than 30
seconds a fault message appears
on the display.
After a prolonged period of
interruption to the power supply,
the control lock will be
deactivated. If this is the case, turn
it back on as described above.
The maximum extent the doors of
the multifunction ovens can be
opened to is 110°.
The doors are not held in place
when open and may tend to
reclose. During use, pay attention
not to come into contact with the
internal glass pane to prevent
burns.
