35
ALARM ID
DESCRIPTION
USER ACTION
AF:30
During the cycle, the wash
chamber water level exceeds
the safety level. Water safety
level.
Check the machine's water supply:
1. Supply pressure.
2. Check that the connections are correct, as specified in this
manual.
User: run the DEFAULT PROCEDURE described above. If the
alarm does not reset, run the RESET PROCEDURE.
If you find any leaks: immediately close all supply taps and
contact technical service.
AF:32
Water remaining in the wash
chamber when the machine is in
stand-by.
User: run the DEFAULT PROCEDURE described above. If the
alarm does not reset, run the RESET PROCEDURE.
If you find any leaks: immediately close all supply taps and
contact technical service.
AF:33
Incorrect steam condenser
water fill. No water in the steam
condenser.
Indicates that there is no water in the steam condenser when
it is expected to be there.
Check the water supply:
1. Supply pressure.
2. Check that the connections are correct as specified in this
manual.
3. Obstructions and restrictions along the hoses.
Run the DEFAULT PROCEDURE described above. If the alarm
does not reset, run the RESET PROCEDURE.
AF:34
Steam condenser water drain
failed.
Check the drain hookup:
1. Height and position of drain fittings
2. Check that the connections are correct as specified in this
manual.
3. Obstructions and restrictions along the hoses.
User: run the DEFAULT PROCEDURE described above. If the
alarm does not reset, run the RESET PROCEDURE.
AF:54
Door opening detected during
cycle. Door interlock
microswitch fault.
1. Make sure to close the door properly before running a
wash cycle.
2. Do not force the door open during a cycle, always use the
appliance's controls to pause the cycle and open the door.
3. Make sure there are no objects jammed between the door
and the dishwasher chamber which are stopping the door
closing.
3. Run the DEFAULT PROCEDURE described above. If the
alarm does not reset, run the RESET PROCEDURE.
AF:56
Door lock fault, no automatic
open.
Make sure to close the door properly before running a wash
cycle.
Try opening the device again with the Open door button.
If necessary, use the manual door release procedure
described in this manual.
Run the DEFAULT PROCEDURE described above. If the alarm
does not reset, run the RESET PROCEDURE.
A:58
Dryer does not heat up. Only for
model SWT260X
User: run the DEFAULT PROCEDURE described above. If the
alarm does not reset, run the RESET PROCEDURE.