background image

EN

 7

2.  Installation and hook-up

Remove the polystyrene basket retainers.
Position the appliance in the desired place of installation. The back or sides 
of the dishwasher may be placed up against walls or other furniture units. 
If  the  dishwasher  is  installed  near  a  heat  source,  fi t  the  special  insulating 
panel to prevent overheating and malfunction of the appliance. To ensure 
stability, install integrated or built-under dishwashers only under continuous 
worktops, and screw them to the adjacent units. To facilitate the installation 
procedure, the intake and drain hoses can be positioned in any direction; 
make sure that the hoses are not kinked, crushed or pulled too tightly. Make 
sure to tighten the locking ring-nut once the pipes have been placed in the 
direction required. A hole at least 8 cm in diameter is required to allow the 
power supply cable and pipes to pass.

Level  the  appliance  on  the  fl oor  using  its  adjustable  feet.  This  operation  is 
essential for the ensuring correct operation of the dishwasher.

Building-in  a  dishwasher  underneath  a  ceramic  hob  is 

absolutely

 

forbidden

.

A  dishwasher  can  be  built-in  underneath  a  conventional  hob  provided 
there is 

no break 

in the kitchen worktop, and the dishwasher and hob

 

are 

installed and secured correctly

, so that 

no hazards are

 

generated

.

WARNING!  Some  protective  systems  preventing  access  to  the  door  opening 
and closing mechanisms are not active until the appliance has been installed.
If the appliance is not built into a cabinet, or is built into a cabinet but without 
one or both front panels, some mechanical parts which may cause serious injury 
when the door is opened and closed are accessible. 
In  all  cases,  never  insert  your  hands  into  openings  at  the  side  of  the  bottom 
panel while the door is being opened or closed.

Never  open  the  door  of  the  appliance  with  the  bottom  drawer  partially  or 
completely  open  -  If  the  bottom  of  the  cabinet  in  which  the  appliance  is  built-
in  contains  a  drawer,  make  sure  that  it  is  completely  closed  before  opening 
the  dishwasher  door.  Opening  the  door  with  the  bottom  drawer  partially  or 
completely open may damage the bottom panel fi xing devices.

Installation instructions

Содержание STH903



































Отзывы: