Smeg STA6544, Инструкция по эксплуатации

Страница: 18 / 44

User instructions
16
3.2 Washing programs
Before starting a washing program make sure that:
•
The water supply tap is open.
•
The softener container contains regenerating salt.
•
The correct amount of detergent has been added to the
dispenser.
•
The baskets have been correctly loaded.
•
The spray arms are able to rotate freely and without
obstruction.
•
The dishwasher door is securely closed.
OPTION SELECTION
Options are selected by pressing the relative button by the symbol of the
option required; the light comes on to confirm that the option has been
activated.
•
It is not possible to select any options when the soak
program is being used.
•
All options except "3/1" are disabled at the end of the wash
cycle. To disable the “3/1” option, press the relative button
(the light goes out).
•
All options, including "3/1" are disabled when a program is
CANCELLED after it has begun.
ADDITIONAL OPTIONS
Some models feature additional options, activated by pressing two
buttons simultaneously . In this case, two lines in the control panel
graphics link the symbol of the additional option to the two buttons to be
pressed simultaneously to enable it. (e.g.
“3/1” in this illustration)