User instructions
14
3.2 Washing programs
Before starting a washing program make sure that:
•
The water supply tap is open.
•
The correct amount of detergent has been added to the
dispenser.
•
The baskets have been correctly loaded.
•
The spray arms are able to rotate freely and without
obstruction.
•
The dishwasher door is securely closed.
EXTRA PROGRAMS
(available in all programs except the soak program)
Button gives access to
four extra programs
in addition to the ones which
can be selected directly using the program selector button.
This button must be pressed (the light comes on)
after
selection of the
“main” program (2,3,4 or 5).
This function
is retained in the memory
, so the button has to be pressed
again (the light goes out) if the user wishes to execute one of the 5 main
programs at the next cycle.
“3/1” OPTION OPTIONS
(available in all programs except the soak program)
By pressing the button you activate the "
3/1
" option, confirmed when the
relative light comes on. This option has been studied for the use of
dishwashing powder or tablets with integrated substances in place of
regenerating salt or rinse-aid known on the market as “3 in 1” or “triple
action” products; in this case the dishwasher will use the product in an
optimal way avoiding salt and rinse-aid consumption, which could
already be found in the dishwasher.
Note:
When selecting the "
3/1
" button, it is normal that the salt and
rinse-aid lights remain on, if their containers are empty.
3/1 products are not suitable for use with excessively hard water.
Therefore, if the water hardness is set higher than H3, the 3/1 OPTION
light flashes to indicate a setting error. This does not prevent the use
of the option, but the washing results might not be of the best.
Содержание STA6443NL
Страница 1: ...INSTRUCTION MANUAL GUIDE FOR USING THE DISHWASHER AND THE WASHING PROGRAMS...
Страница 2: ......
