General instructions
5
FOR YOUR SAFETY
IF YOU SMELL GAS:
• Turn off gas supply at bottle
• Extinguish all naked flames;
• Do not operate any electrical appliances
• Ventilate the area
• Check for leaks as detailed in this manual
If odour persists, contact your dealer or gas supplier immediately
Do not temper with the appliance.
BURN-BACK (FIRE IN BURNER TUBE OR CHAMBER)
In the event of a burn-back, where the flame burns back to the jet, immediately turn off the gas supply at
the control valve on the panel. After ensuring the flame is extinguished, wait for I minute and re-light the
appliance in the normal manner. Should the appliance again burn back, close the control valve and call a
service technician. Do not use the appliance again until the service technician has declared that it is safe
to do so.
GAS-PRESSURE REGULATOR
This appliance requires an operating pressure of 2,8 kPa at the appliance. A suitable LPG regulator that
complies with the requirements of SANS 1237 must be installed.
IMPORTANT INFORMATION FOR THE USER
This appliance may only be installed by a registered LP Gas installer.
All registered installers are
issued with a card carrying their registration number. Ask to be shown the card before allowing the
installation work to commence and make a note of the Installer QCC number. Upon completion of the
installation, the installer is required to explain the operational details of the appliance together with the
safety instructions. You will be asked to sign acceptance of the installation and be provided with a
completion certificate. You should only sign for acceptance of the installation when the installation is
completed to your satisfaction.
Note that your invoice is required in the event that you wish make a guarantee claim.
IMPORTANT INFORMATION FOR THE INSTALLER.
This appliance may only be installed by a LP gas installer registered with the Liquefied Petroleum Gas
Association of Southern Africa. The appliance must be installed in accordance with the requirements of
SANS 10087-1 and any fire department regulations and/or local bylaws applicable to the area. If in doubt
check with the relevant authority before undertaking the installation. Upon completion of the installation
you are required to fully explain and demonstrate to the user the operational details and safety practices
applicable to the appliance and the installation.
